VKTR
VKTR

PNG · JPG · WebP · HEIC → SVG · PDF · EPS · DXF

Image to DXF converter for laser, CNC and CAD

VKTR traces a PNG, JPG, WebP or HEIC image into vector outlines and saves them as a DXF: closed polylines in millimetres, one layer per colour, at the width you choose. The conversion runs in your browser.

Or drop an image anywhere on this page · Free to convert, no account · Runs in your browser · Up to 5 MB free, 20 MB on a plan

01 / How it works

How to convert an image to DXF in three steps

  1. 01

    Open your image

    Drop, choose or paste a PNG, JPG, WebP or HEIC up to 5 MB free (20 MB on a plan) into the Studio. High-contrast artwork gives the cleanest outlines.

  2. 02

    Trace the outlines you need

    Switch to black and white for cut lines and adjust the threshold, or keep colours to get one layer each. Reduce nodes to simplify the paths.

  3. 03

    Download the DXF

    Set the finished width in millimetres and download the DXF.

02 / What you get

What is in the DXF file

  • Closed polylines

    Every shape is a closed POLYLINE in an R12 DXF, the long-standing version CAD and CAM programs read. Curves are flattened into short segments within 0.05 mm.

  • Drawn in millimetres

    Coordinates are in millimetres at the width you set when you download (1 to 5,000 mm), and the file marks its units as millimetres. Some programs ignore that mark in an R12 DXF. If your program has a DXF import units setting, set it to millimetres, then check one known size.

  • One layer per colour

    Each colour of the trace is its own layer (COLOUR_1, COLOUR_2 and so on), coloured with the nearest AutoCAD Color Index.

  • Outlines, not fills

    A DXF carries no fills: outer edges and holes are separate outlines. Check how your cutting software treats nested shapes before you run a job.

03 / Tips

For the cleanest result

  • Black and white for cutting

    A single-colour trace with a tuned threshold usually gives the cleanest cut lines. Line art, logos and silhouettes work best.

  • Fewer nodes, smoother cuts

    The Reduce nodes tool simplifies paths, and a larger minimum shape size drops specks too small to cut.

  • Check before the machine does

    Open the DXF in your CAD or laser software, confirm the size and layers, and run a test on scrap material.

04 / Questions

Image to DXF: questions and answers

Can I convert a JPG or PNG to DXF?

Yes. VKTR traces PNG, JPG, WebP or HEIC up to 5 MB free (20 MB on a plan) into vector outlines and downloads them as a DXF.

Which DXF version does VKTR write?

R12 (AC1009), with coordinates in millimetres. Shapes are closed POLYLINE entities, one layer per colour. Some programs ignore the unit mark in an R12 file, so if your program has a DXF import units setting, set it to millimetres.

DXF or SVG for laser cutting?

Both carry vector outlines. VKTR's DXF uses millimetres and closed polylines with no fills; its SVG keeps fills, colours and smooth curves. Use whichever your laser or CAM software asks for: many accept both.

Does the DXF keep my colours?

Each colour becomes its own layer, given the nearest AutoCAD Color Index. Gradients become a single average colour.

Is the image to DXF conversion free?

Converting, previewing and editing are free with no account. Downloading needs a free account, and every free account gets 2 downloads a day.

05 / More

Other converters and guides

Stop tracing.Just VKTR it.