# White Ink Layer: How to Prepare Artwork for UV Printing on Glass, Acrylic and Metal

> Colour inks are see-through. On clear, dark or metallic surfaces, the white layer decides what the print looks like. How to plan it and build it in the file.

Published 12 November 2026 by VKTR · 9 min read · https://www.vktrstudio.com/insights/white-ink-layer

## Key takeaways

- UV colour inks are translucent. On clear, dark or metallic surfaces, white underneath makes colours read as they do on paper; without it they look like a tint.
- There are three choices: no white, spot white under selected elements, or full white under the whole design. Reverse (second-surface) printing mirrors the artwork and puts white behind the colour.
- The white layer is built from the same shapes as the artwork, on its own layer, in a spot colour the printer’s software reads as white, such as RDG_WHITE in Roland VersaWorks.
- Vector shapes turn the white layer into a selection, not a redraw. [VKTR Studio](https://www.vktrstudio.com/studio) traces a logo into shapes grouped by colour, ready for that step.

**A white ink layer is a separate layer in a print file that tells a UV printer where to lay opaque white ink, usually under the colour, so the design stays bright on clear glass, clear acrylic, dark materials and bare metal.** You build it by copying the shapes that need to look solid onto their own layer, filling them with a spot colour the printer’s software treats as white, and saving it with the artwork.

This guide covers when you need white and how much, how reverse printing changes the order, and how to build the layer in Illustrator, Inkscape or Affinity Designer. It applies to industrial flatbed and cylindrical presses and to desktop UV printers alike.

## Why UV printing needs white ink

UV printers print colour with cyan, magenta, yellow and black inks that are translucent, like most printing inks. On white paper, the paper is the white of the picture. On clear glass there is nothing white behind the ink, so the colours read as a tinted film and the background shows through. On dark or coloured materials the colours darken or shift, and on bare aluminium the metal shows through every tone.

White ink fixes that. Printed first, it gives the colour an opaque base. [Sun Studio](https://www.sunstudio.ae/services/glass-printing-dubai/), a UV printing studio in Dubai in the same group as VKTR, puts it plainly on its glass printing page: without white, colour on clear glass reads as a tint and the background shows through.

## No white, spot white or full white

Where the white goes is a design decision, not a printer setting. There are three common choices:

**Three white ink strategies**

| Strategy | What prints white | How it looks | Typical use |
| --- | --- | --- | --- |
| No white | Nothing | Colours tint the material and the surface shows through | Light opaque materials, tinted effects on glass, metal-effect prints on aluminium |
| Spot white | Only chosen elements | Logo and text read solid; the rest stays clear or metallic | Logos on glass, bottles and acrylic; lettering on dark materials |
| Full white, also called flood white | The whole design area | Like a print on white paper laid on the surface | Photos and full-colour artwork on clear or dark materials |

Spot white is the usual choice for logos. Sun Studio’s guide to [aluminium prints where the metal shows through](https://www.sunstudio.ae/insights/aluminium-prints-metal-shows-through-dubai/) describes it as white under the logos, lettering or colour blocks that must read solid, while the rest of the picture stays see-through. The same guide notes the opposite choice: with no white at all, the metal becomes the lightest tone of the picture, and anything that needs accurate colour or bright whites on metal needs white underneath.

## Reverse printing turns the order around

Reverse printing, also called second-surface printing, puts the ink on the back of clear glass or acrylic, so it is seen through the material and protected by it. Two things change in the file. The artwork is mirrored, and the layer order flips: colour prints first and white goes on top of it, which puts the white behind the colour as seen from the front.

The layer orders a printer can do depend on the machine. Mimaki’s white and clear ink guide for its UJV100 printer, for example, lists combinations such as colour then white, and white then colour. Ask your printer which order they need before you build the file.

## How white is set up in the file

The printer’s RIP (raster image processor), the software that drives the press, has to know which areas are white. Most RIPs look for a **spot colour** with a particular name, applied to vector shapes on their own layer.

Roland’s VersaWorks RIP is a well-documented example. Its manual tells designers to duplicate the colour layer in Adobe Illustrator, name the copy White, and fill the white areas with the spot colour RDG_WHITE; VersaWorks then prints anything in that swatch with white ink. The same manual notes that VersaWorks can only recognise a spot colour in vector data. A white layer drawn in pixels is not read as white.

Other RIPs work differently. Mimaki’s RasterLink can replace a chosen call-out colour with white, or build a special plate inside the RIP. Names and methods change from machine to machine, so **ask your printer what spot colour name and layer order they use before building the file.** If you do not know who will print it, a separate layer named White, filled with a spot swatch named White, is widely understood.

Some RIPs can also generate white automatically under everything that prints. Roland’s manual points out the limit: an automatic plate cannot target only specific objects. For spot white, the white has to be in the file.

## How to build a spot white layer, step by step

### 1. Start from vector artwork

Use the logo or design as vector shapes, not a picture. If you only have a PNG or JPG, trace it first: [VKTR Studio](https://www.vktrstudio.com/studio) turns it into shapes grouped by colour and downloads an SVG or PDF that opens in Illustrator, Inkscape or Affinity Designer. Its **Select every shape of this colour** command helps you check which shapes belong together before you export.

### 2. Duplicate the artwork onto a new layer

Copy the artwork layer and name the copy White. Keep it exactly aligned with the colour layer, and lock the colour layer so neither can move.

### 3. Keep only the shapes that need white

On the White layer, delete the shapes that should stay clear or metallic. For a logo on clear glass, you usually keep everything. For a design where some parts should let the material show, delete those parts.

### 4. Fill them with the white spot colour

Select all the remaining shapes and fill them with the spot swatch your printer uses, such as RDG_WHITE for Roland VersaWorks. Remove strokes, or expand them into fills, so the white matches the colour shapes exactly.

### 5. Choke the white slightly

If white edges could show around the colour, shrink the white a fraction so it sits just inside the colour. This is called a choke. Many RIPs have a choke setting; eufyMake’s guide for its E1 desktop UV printer, for example, suggests raising it in 0.1 mm steps, to at most 0.5 mm, only if white edges appear. Ask your printer whether to choke in the file or leave it to the RIP.

### 6. Mirror for reverse printing, then save

For printing on the back of glass or acrylic, mirror both layers and put the white layer in the order your printer asks for. Save a PDF that keeps the layers, or the format your printer prefers, and say in your note which face is printed.

## When the white layer should be raster

Vector shapes are right for logos, lettering and flat illustrations, because their edges must be crisp and match the colour exactly. Two cases are different:

- **Photos with full white.** The white is simply the outline of the picture, usually a rectangle, or the outline of a cut-out subject. That is still a vector shape, but a simple one.
- **Soft edges and fades.** A solid white under a fade leaves a hard edge where the colour thins out. The white has to fade too. Sun Studio’s aluminium guide makes the same point: if a solid element fades into a see-through part, the white fades with it. That needs a greyscale white channel or image rather than one solid shape, and Mimaki’s RasterLink manual notes that a special plate made in the RIP prints at one density, so varying density needs separate image data.

If your design has fades over a clear or metallic surface, talk to the printer before you build anything. Not every press or RIP handles a graded white the same way.

## Notes by surface

- **Clear glass and acrylic:** spot white under logos and text, full white under photos, and reverse printing for panels seen from one side. Sun Studio’s glass page asks customers to leave clear areas transparent, mark which elements need white behind them, and say whether the print goes on the front or the back face.
- **Dark materials such as black acrylic, dark wood and leather:** white under everything that should show its true colour.
- **Bare aluminium and other metals:** decide which areas show the metal, then put white under anything that must look solid or colour-accurate.
- **Bottles, cans and tumblers:** the same rules, applied to the flat wrap of the object. See [artwork for bottle and tumbler printing](https://www.vktrstudio.com/insights/bottle-tumbler-wrap-artwork).

Whatever the surface, approve a printed sample on the actual item before a full run. Adhesion and colour depend on the material and its coating, and a screen preview cannot show either. Our guide to [what prepress is](https://www.vktrstudio.com/insights/what-is-prepress) covers the whole process from preflight to proof, and [spot UV file setup](https://www.vktrstudio.com/insights/spot-uv-file-setup) uses the same mask method for gloss and raised layers.

## White ink layers: questions and answers

### What is a white underbase?

Another name for a white layer printed under the colour so it stays bright on dark or clear materials. The term comes from screen, DTG and DTF printing; in UV printing it is also called a white layer, white underlay or flood white.

### Do I need white ink on white materials?

Usually not. A white, opaque surface already acts as the white of the design. White ink is for clear, dark, coloured and metallic surfaces.

### Can a PNG or JPG carry a white ink layer?

Some workflows take white as a separate greyscale image, but many RIPs read spot white only from vector shapes. Roland VersaWorks, for example, recognises spot colours only in vector data. Trace the logo to vector shapes first.

### What is the difference between front and reverse printing on glass?

Front printing puts the ink on the face you look at, white first and colour on top. Reverse printing puts it on the back, mirrored, with colour first and white behind it, so the glass protects the print.

### Why is there a white outline around my UV print?

The white layer is slightly larger than the colour, or the two are not aligned. Shrink the white a little (choke it) in the file or in the printer’s settings, and check the two layers line up exactly.

## Start with clean shapes. Build the white layer from them.

Trace a logo in VKTR Studio, check the shapes and download SVG or PDF for your white and varnish layers. Converting is free; a free account downloads 2 files a day.

[Trace your artwork in VKTR Studio](https://www.vktrstudio.com/studio)

## References

- [Roland DG: Creating printing data for white ink (UV printer guide)](https://downloadcenter.rolanddg.com/contents/manuals/UV-Guide_USE_EN/sjr1605050982690.html)
- [Roland DG VersaWorks 7: What is spot color?](https://downloadcenter.rolanddg.com/contents/manuals/VW7_USE_EN/ggk1761023507516.html)
- [Roland DG VersaWorks 6: Adding white plates to CMYK data](https://downloadcenter.rolanddg.com/contents/manuals/VW6_English/bkl1713171804318.html)
- [Mimaki RasterLink7 reference guide: Special plate](https://mimaki.com/manual/raster-link7/reference_guide/en-US/523637515.html)
- [Mimaki: UJV100 white and clear print guide (PDF)](https://brasil.mimaki.com/archives/034/202310/D203721-10_UJV100Plus_WhiteAndClearPrintGuide_e.pdf)
- [eufyMake: How to set the white underbase choke on the E1 UV printer](https://service.eufymake.com/article-description/eufyMake-UV-Printer-E1-How-to-correctly-set-White-Underbase-Choke)
- [Sun Studio: Glass printing in Dubai](https://www.sunstudio.ae/services/glass-printing-dubai/)
- [Sun Studio: Aluminium prints where the metal shows through](https://www.sunstudio.ae/insights/aluminium-prints-metal-shows-through-dubai/)
