# How to Make a Stencil From a Picture: Islands, Bridges and Cutting

> A stencil is a sheet with holes in it, so a picture has to become one colour of clean shapes first. The part most guides skip is the islands: the pieces that drop out when you cut. Here is how to find them and keep them.

Published 22 November 2026 by VKTR · 9 min read · https://www.vktrstudio.com/insights/stencil-from-picture

## Key takeaways

- To make a stencil from a picture, trace it into one colour of solid shapes, add bridges so no piece falls out, then cut it from stencil film, plastic or card.
- An island is any piece of the sheet surrounded by cut-out areas, such as the middle of an O. In our test badge, five islands would have fallen out, including the whole centre.
- A bridge is a thin strip of sheet that holds an island in place. Add it in an editor such as Inkscape (Path > Difference), or use a stencil font for text.
- VKTR Studio does the tracing in Black & white mode and exports SVG, PDF, EPS or DXF. It does not add bridges: that step is yours.

**To make a stencil from a picture, turn the picture into one colour of solid shapes by tracing it in black and white, then add bridges: thin strips that hold the inner pieces in place, such as the middle of an O. Without bridges, those pieces fall out when you cut and the paint fills them. Then cut the file on a cutting machine or a laser, or print it and cut it by hand.**

This guide is for anyone painting a sign, a wall, a T-shirt, a box or a piece of furniture with a design that exists only as a picture. It covers which pictures work, how to get clean shapes, how to spot islands and add bridges, and how to cut. It is about paint and spray stencils. For laser engraving and cutting in general, see our guide to [laser engraving files](https://www.vktrstudio.com/insights/laser-engraving-file).

## What makes a picture work as a stencil

A stencil is a sheet with holes in it. Paint goes through the holes and nowhere else, so each stencil prints one flat colour with hard edges. A picture works when it can be described that way: solid dark shapes on a light background, or the reverse.

**Which pictures make good stencils**

| Picture | As a stencil | What to do |
| --- | --- | --- |
| Logo, icon or silhouette | Works well | Trace it in Black & white mode |
| Bold lettering | Works, with bridges in letters such as O, A and R | Add bridges, or set the text in a stencil font |
| Line drawing | Works if the lines are thick enough for the size | Thicken thin lines before you cut |
| Photo of a person or place | Only as a two-tone poster look | Simplify it first, and expect to lose shading |
| Design in several colours | One stencil per colour | Trace in Colour mode with few colours, cut each colour as its own layer |

Stencil Stop, a company that makes stencils to order, describes the same idea: an image with many colours is simplified into two colours before it can be cut. Our guide on [turning a photo into a vector](https://www.vktrstudio.com/insights/convert-photo-to-vector) shows what a traced photo looks like.

## Islands and bridges, in plain words

An **island** is a piece of the stencil sheet that is surrounded by cut-out areas. A **bridge** is a thin strip of sheet that joins the island to the rest of the stencil. Silhouette's support page puts it this way: designs for stencils usually need their inner parts connected to the outside by a bridge, and designs with islands but no bridges drop their inner details.

Stencil Stop calls floating islands the biggest constraint in stencil design, because every part of the stencil must stay connected as one piece. It says its own bridges range from 0.05 inches at the smallest to around 0.25 inches at the largest (roughly 1.3 to 6.4 mm), and that it may add more than one bridge to a large island so it does not tear off.

![Three panels of an invented mountain badge: traced in black, then with its five islands marked in orange (the whole middle, the sun, the snowcap and the holes in P and A), then with six thin bridges cut through the black](https://www.vktrstudio.com/insights/stencil-from-picture/stencil-islands-bridges-1600.webp)

*Our test badge, made up for this article. 1: VKTR Studio's trace, one colour. 2: the five islands that would fall out of a cut stencil, marked in orange. 3: the same file with six bridges 2 mm wide, two of them for the large middle. No island is left.*

## What we found when we counted the islands

We drew a simple badge for this test: a ring, a sun drawn as a ring, a mountain with a snowcap, and the word PEAK. We traced it with VKTR Studio's automatic settings, which read it as one-colour artwork and gave 7 shapes. A short script then counted every piece of sheet that was not joined to the edge, and added straight bridges 2 mm wide until none was left.

**Islands in the traced test badge at 100 mm wide (22 Nov 2026)**

| Island | Area | Bridges added |
| --- | --- | --- |
| The whole middle of the badge, inside the ring | 3,234 mm² | 2, top and bottom |
| The middle of the sun | 95 mm² | 1 |
| The snowcap on the mountain | 23 mm² | 1 |
| The hole in the P | 7.6 mm² | 1 |
| The hole in the A | 5.5 mm² | 1 |

The surprise is the first row. The ring around the badge looks like a frame, but cut as a stencil it would free the entire centre, mountain, sun and letters included. Small islands are easy to spot in letters; large ones hide in borders and outlines. The script placed the bridges where they were shortest. By hand, you would place them where they look best, which is part of a stencil's style.

## How to make a stencil from a picture

### 1. Choose a picture with clear shapes

A stencil prints one flat colour, so the picture has to read as solid shapes against a plain background. Logos, silhouettes, lettering and bold drawings work well. A photo of a face or a landscape has soft shading that a stencil cannot show. Use the largest, sharpest copy you have, and only use a picture you made or have the right to use.

### 2. Trace it in Black & white mode

Open [VKTR Studio](https://www.vktrstudio.com/studio) and drop in a PNG, JPG, WebP or HEIC (up to 5 MB on a free account). Set Mode to Black & white. The Threshold decides which parts become ink: Auto picks it from the image, and you can move it if thin parts vanish or dark areas merge. Raise Remove specks under to clear dust, because every speck becomes a tiny hole in the stencil.

Black in the result is what you cut out, where the paint will go. If you want the opposite, use Invert (light ink on dark).

### 3. Set the real size and check the details

Set the width in millimetres to the size you will paint. Then zoom in on the thinnest lines and the smallest gaps. A detail that looks fine on screen can be too thin to cut cleanly, or too weak to survive painting. Make it thicker, or simplify the picture and trace again.

### 4. Find the islands

Look for every piece of sheet that is surrounded by black on all sides: the middles of O, A, B, D, P, Q and R, the inside of a ring, a small shape inside a bigger one. Each of these falls out when you cut, and the paint fills the space it leaves.

### 5. Add bridges or use a stencil font

Download the SVG and open it in a free editor such as Inkscape, and ungroup the shapes (Object > Ungroup). Draw a thin rectangle across the black, from each island to the sheet outside it. Select the rectangle and the black shape under it and choose Path > Difference: the rectangle is cut out of the black, which leaves a bridge of sheet. In Silhouette Studio, the same job is the Subtract option in the Modify panel.

For lettering, it is often easier to set the words in a stencil font, which has its bridges built in, and trace only the picture.

### 6. Export and cut

Save an SVG for Cricut Design Space and most cutting software, or a DXF for software that prefers it. Cut it on a cutting machine, a laser or by hand with a craft knife. With adhesive stencil film, remove the parts where the paint should go, then move the stencil with transfer tape.

## Do you always need bridges?

Not always. Cricut's instructions for its adhesive stencil film say to use transfer tape to move a stencil from the liner to the surface when it is intricate or has many island pieces, such as the inside of the letter O. Cricut describes the film as having an adhesive backing that removes without residue, so each piece stays where it was placed until you lift it.

**When islands need bridges**

| Stencil | Bridges needed? |
| --- | --- |
| Adhesive stencil film, placed with transfer tape | Not always: Cricut uses transfer tape for designs with many islands |
| Plastic sheet you will reuse, cut by machine or laser | Yes: a loose island cannot be held in place |
| Card or paper cut by hand | Yes, so the middles stay in place while you paint |
| Large stencil with big islands | Yes, and more than one bridge on each big island |

Cricut also notes that with stencil film you remove the pieces where you want the paint to go, which feels like the opposite of weeding vinyl. If you are new to cutting machines, our guide to [SVG files for Cricut](https://www.vktrstudio.com/insights/svg-for-cricut) covers uploading the file to Design Space.

## Which file to export

- **SVG** for Cricut Design Space, Inkscape and most cutting software. VKTR's SVG keeps one group per colour, which helps with layered stencils.
- **DXF** for software that asks for it. VKTR writes closed outlines in millimetres, one layer per colour, and the holes as their own outlines. See [image to DXF](https://www.vktrstudio.com/image-to-dxf).
- **PDF** if you will print the design and cut it by hand. Print it at 100% so the size stays true.

If the picture is a drawing on paper, our guide on [turning a sketch into a vector](https://www.vktrstudio.com/insights/sketch-to-vector) explains the threshold in more detail. If it came from the internet, check first that you may use it: see [are Pinterest images copyright free](https://www.vktrstudio.com/insights/pinterest-images-copyright).

## Making a stencil: questions and answers

### Can VKTR Studio add bridges to a stencil?

No. It traces the picture into clean one-colour shapes and exports SVG, PDF, EPS or DXF. Add bridges afterwards in an editor such as Inkscape, or in your cutting machine's software, or use a stencil font for text.

### How thick should stencil bridges be?

It depends on the size, the material and how you cut. Stencil Stop, a stencil maker, uses bridges from 0.05 to around 0.25 inches (about 1.3 to 6.4 mm). It adds that larger bridges help a stencil last longer and keep pieces from tearing off.

### Can I make a stencil from a photo?

Only as a simplified, two-tone version. A stencil prints one flat colour, so shading turns into solid areas or disappears. Photos with strong light and shadow work best. Expect to clean up the result before cutting.

### How do I make a multi-colour stencil?

Make one stencil per colour. Trace the picture in Colour mode with only as many colours as you will paint, then cut each colour as its own layer and paint them one after another, lining them up carefully.

## Have the picture? Trace it in one colour.

Drop the image into VKTR Studio, choose Black & white, set the width in millimetres and download SVG or DXF for cutting. Converting is free; a free account downloads 2 files a day.

[Trace a picture](https://www.vktrstudio.com/studio)

## References

- [Smart Stencil and Stencil Film instructions (Cricut Help)](https://help.cricut.com/hc/en-us/articles/360009555913-Smart-Stencil-Stencil-Film-Instructions)
- [Endless potential with stencil (Cricut blog)](https://cricut.com/blog/gb/endless-potential-with-stencil/)
- [Bridges for stencil designs (Silhouette America support)](https://silhouetteamerica.freshdesk.com/en/support/solutions/articles/35000210667)
- [Stencil Design 101 (Stencil Stop help centre)](https://stencilstop.zendesk.com/hc/en-us/articles/40429482376340-Stencil-Design-101)
- [The islands and bridges of stencils (CreativePro)](https://creativepro.com/scanning-around-gene-islands-and-bridges-stencils/)
- [Boolean operations (Inkscape Beginners' Guide)](https://inkscape-manuals.readthedocs.io/en/1.1/boolean-operations.html)
- [VTracer, an open-source tracer VKTR Studio uses (Vision Cortex)](https://github.com/visioncortex/vtracer)
