# Vector Files for Screen Printing: One Shape per Ink

> Screen printing makes one screen for every ink, so a good file is less about the format and more about the colours inside it. Here is what printers look for, and how to get there from a PNG or JPG of your design.

Published 20 November 2026 by VKTR · 7 min read · https://www.vktrstudio.com/insights/screen-printing-vector

## Key takeaways

- Screen printing uses one screen per ink. A good vector file has one solid, separate shape for each ink and no more colours than you plan to print.
- Gradients and photos need halftone dots, which the printer makes with their own software. For a simple job, make fades flat before you send the file.
- VKTR Studio's Colours setting is a starting point, not a cap. In our test it left 10 colours in an illustration set to 3, so count the Palette chips and merge the extras.
- VKTR exports RGB colours, not named spot colours. Send the printer your ink list, ideally as Pantone numbers, and let them set the underbase and overlaps.

**A vector file for screen printing should hold one solid, separate shape for each ink, with no more colours than you plan to print and no gradients unless the printer will turn them into halftone dots. The format matters less: printers often ask for PDF, EPS or AI, so check which one yours wants. You can build such a file from a PNG or JPG by tracing it, then cutting the palette down to your ink count.**

This guide is for anyone ordering printed T-shirts, bags or posters who has been asked for “vector artwork” and only has an image of the design. It covers what the printer does with your file, how to prepare it in VKTR Studio, and where the printer's own work begins.

## Why screen printers ask for vector artwork

In screen printing, each ink goes through its own screen. The printer outputs one film per ink, burns it onto a screen and prints the colours one after another. ScreenPrinting.com's guide puts it simply: spot colours are what most RIPs use to decide what is printed on each film.

So the printer needs to pull each ink out of your artwork cleanly. In a vector file where each colour is a separate, solid shape, that is quick. PRINTING United Alliance's guide on garment separations says the key in a vector program is to turn every printable colour into a spot or Pantone colour. A blurry PNG with soft edges and hundreds of shades gives them nothing clean to separate.

**What a printer looks for in a screen printing file**

| In the file | Why it matters |
| --- | --- |
| One solid shape per ink | Each ink becomes one film and one screen |
| No more colours than inks | An extra shade can mean an extra screen, or a question from the printer |
| Flat fills, not gradients | A solid screen prints solid ink; fades need halftone dots |
| Text as shapes | The printer may not have your font |
| Lines thick enough for the print size | Very fine detail can fill in or break up on fabric |

## Spot colour, process and halftones

Most logo and text jobs are **spot colour**: each ink is mixed to match one colour, and printed solid. ScreenPrinting.com calls this what most screen printers deal with day to day. This is where a traced vector file fits best.

Photos and artwork with shading are different. FESPA describes full-colour separations printed with four or more transparent process inks, and halftone printing as rarer in screen printing. PRINTING United Alliance notes that you need a RIP (raster image processor) to print halftones, and that artwork with lots of shading and photographic parts is very hard to separate in a vector program. That work is the printer's or a separator's job, usually from the original image.

If your design has a soft shadow or a fade, you have two honest choices: make it a flat colour, or keep it and let the printer handle it as halftone. Tracing does not turn a photo into spot colours. Our guide on [turning a photo into a vector](https://www.vktrstudio.com/insights/convert-photo-to-vector) shows what a traced photo looks like.

## How to prepare a screen printing file from an image

### 1. Agree the ink count with your printer

Decide how many inks the design will print in before you trace anything. Each ink needs its own screen, so this number drives the price and the look. Ask the printer whether white counts as an ink on your garment colour, and whether they will add a white underbase on a dark shirt.

### 2. Trace the clearest image you have

Open [VKTR Studio](https://www.vktrstudio.com/studio) and drop in a PNG, JPG, WebP or HEIC of the design (up to 5 MB on a free account). Use the largest, least compressed copy you have. For a one-ink design, choose Black & white mode. For more inks, use Colour mode and set Colours to your ink count as a starting point.

### 3. Bring the palette down to your ink count

Count the chips in the Palette panel, not the number in the Colours setting. If there are more chips than inks, click the extra ones and choose Merge into nearest. Recolour each remaining chip to something close to its ink, so the file is easy to read.

If the shirt colour should show through, such as white letters on a black shirt, click that colour and choose Make transparent. Otherwise it stays a shape, and a printer may read it as one more ink.

### 4. Make gradients flat

A solid screen prints solid ink. If VKTR kept a fade as a gradient fill, select it and replace it with one flat colour. If the fade must stay, keep it and ask the printer to turn it into halftone dots, or send them the original image as well.

### 5. Check fine detail at the real print size

Set the width in millimetres to the size it will print, then zoom in on thin lines, small text and tiny gaps. Detail that is hard to see on screen may fill in or break up on fabric. Ask the printer for their smallest line, because it depends on their mesh and ink.

### 6. Export and send it with the ink list

Download a PDF or EPS (or an SVG if the printer works in it), at the print width. VKTR writes each colour as a plain RGB fill, not a named spot colour, so write the ink colours in your message, ideally as Pantone numbers. The printer then sets the spot colours, the underbase and the overlap between inks.

## What we saw when we tested the Colours setting

We ran four test images from VKTR Studio's own sample set through its tracing pipeline with automatic settings, then again with Colours set to 3, and counted the different fill colours in each result.

**Different fill colours in the traced result (VKTR Studio test images, 20 Nov 2026)**

| Test image | Auto settings | Colours set to 3 |
| --- | --- | --- |
| Simple two-colour logo | 2 | 2 |
| Stamp in red and blue on white | 3 (white is a shape) | 3 (white is a shape) |
| Logo with two gradients | 4, two of them gradient fills | 3, two of them gradient fills |
| Flat illustration with many colours | 10 | 10 |

Two things stand out. First, the Colours setting did not cap the result on the busy illustration, so always count the Palette chips yourself. Second, white parts inside a design are traced as white shapes. On a white shirt you probably want those transparent; on a dark shirt they are a real white ink.

## What the printer does, not you

- **Spot colours and films.** VKTR writes each colour as an RGB fill. The printer assigns each one to a spot colour and outputs the films.
- **White underbase.** FESPA notes that on black and strongly coloured fabric you will probably need a white underbase printed first. The printer builds it from your artwork. Our guide to the [white ink layer](https://www.vktrstudio.com/insights/white-ink-layer) explains the idea for UV printing.
- **Trapping.** Where two inks meet, the printer may spread one slightly under the other so no gap shows. VKTR adds a one-pixel overlap between colours to avoid hairline seams on screen, but that is not a printing trap.
- **Halftones.** Any fade or photo is turned into dots in the printer's RIP, at their line count and angle.

If the printer asked for an “open file”, see [what to send when a printer asks for an open file](https://www.vktrstudio.com/insights/printer-asked-for-open-file-what-to-send). For which format to send, see [EPS vs SVG vs PDF](https://www.vktrstudio.com/insights/eps-vs-svg-vs-pdf). If your image is so small that it looks blocky, start with [fixing a pixelated logo](https://www.vktrstudio.com/insights/fix-pixelated-logo-for-printing).

## Screen printing files: questions and answers

### How many colours can a screen print have?

As many as the printer can run, but each ink needs its own screen, so more colours usually cost more. Most logo prints use a few spot colours. Ask your printer for their price per colour before you finalise the design.

### Can I send a PNG to a screen printer?

Many printers accept a high-resolution PNG and separate it themselves, sometimes for a fee. A vector file with one shape per ink saves that step and lets you check the colours before printing.

### Does VKTR Studio make colour separations?

No. It traces your image into solid vector shapes, each filled with one colour, which makes separation easier. The printer still sets the spot colours, outputs the films and adds any underbase or trap.

### Should white be in the file for a dark shirt?

Yes, if the design has white in it, keep the white shapes: on a dark shirt they are printed with white ink. On a white shirt, make them transparent so the fabric shows through instead of printing white on white.

## Only have a PNG of the design? Trace it, then cut the palette.

Drop the image into VKTR Studio, merge the palette down to your inks and download PDF, EPS or SVG. Converting is free; a free account downloads 2 files a day.

[Trace a design](https://www.vktrstudio.com/studio)

## References

- [A 5-step guide to separating spot colors in Adobe Illustrator (ScreenPrinting.com)](https://www.screenprinting.com/blogs/news/simple-separations-in-illustrator-tutorial)
- [Separations for garment screen printing (PRINTING United Alliance)](https://www.printing.org/detail/resource/Separations-for-Garment-Screen-Printing)
- [Screen separations in printing (FESPA)](https://fespa.com/en/news-media/screen-separations-in-printing)
- [Prepare artwork for screen printing (Adobe Learn)](https://www.adobe.com/uk/learn/illustrator/web/prepare-artwork-for-screen-printing)
- [VTracer, an open-source tracer VKTR Studio uses (Vision Cortex)](https://github.com/visioncortex/vtracer)
